JDW

IA&C DEPARTMENT

JDW Sugar Mills Ltd.Unit 1

JDW SUGAR MILLS LTD.UNIT1
INSTRUMENT CALIBRATION SHEET

Instrument Name:Select NameLevel TransmitterFlow TransmitterPressure TransmitterTemperature TransmitterOther(please specify)

Doc.No.:Select Doc.No.JDW/INST/CAL/SH-01JDW/INST/CAL/SH-02Other(please specify)

Model.:Select ModelSTD 120STD 624STD 904STD 924STF 924STC 929Other(please specify)

Tag No..:

Location:Select LocationMill House 1Mill House 2Boiler HouseProcess HouseFFEOther(please specify)

Calibration Range:

Process Variable:

Calibration Method:Select MethodJDW/INST/SPC/PTC-01JDW/INST/SPC/TTC-01JDW/INST/SPC/FMC-01JDW/INST/SPC/CVC-01JDW/INST/SPC/PGC-01Other(please specify)

Accuracy/Permissible Limit:Select Accuracy±0.1%FS±0.2%FS±0.3%FS±0.4%FS±0.5%FS±1.0%FS±2.0%FS±3.0%FS±4.0%FS±5.0%FSOther(please specify)

Calibration Frequency:Select FrequencyDailyWeeklyMonthlyAnnuallyAs NeededOther(please specify)

Environmental Temp:Select20°C21°C22°C23°C24°C25°C26°C27°C28°C29°C30°COther(please specify)

Humidity:Select40%RH50%RH60%RH70%RH75%RHOther(please specify)

Calibration Date:

Due Date:

General CalibrationService&CalibrationRepair&Calibration

Calibration Equipment Used

Equipment Name	Model	Serial No.	Make	Traceability Cert No.
SelectPressure Gauge 1Pressure Gauge 2Loop CalibratorPressure CalibratorDw Gauge TesterTemp.CalibratorOther(please specify)

Applied Input Unit:Select UnitmmH₂O"H₂OmmHg"HgPsikgf/cm²M³/hrt/hCelsius (°C)Percent (%)MilimeterOther(please specify)

Output Signal:Select4–20 mA1–5 Volt0–10 VoltOtherOther(please specify)

Calibration Data

Test Point (%)	Applied Input	Ideal Output	As found		As left
			Measured mA	deviation +/-	Measured mA	deviation +/-
0
25
50
75
100

Remarks:Calibration has been completed according to standard procedures,and the instrument output is within permissible limits.

Calibrated by:Select NameMuhammad hanifKhalil ahmedOther(please specify)

Checked by:Select NameMuhammad hanifOther(please specify)